- Syntace x-12 Derailleur hangers and screws are only compatible with frames that have Syntace x-12 Dropouts.
- Hoods with (FD) are Flight-Deck compatible
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
WeThePeople's Arrow 115 Grips have the perfect texture and density to give you new confidence while railing it on the bike. Material: VEX rubber compound Rubber durometer: 30° Size: 115mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends
WeThePeople's Arrow 146 Grips have the perfect texture and density to give you newfound confidence while railing it on the bike. Material: VEX rubber compound Size: 146mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter •…
Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.
This is a replacement sleeve for Jake Seeley’s signature peg. It features a proprietary plastic blend that slides nice when you’re on the grind, and sticks when you want to stall a bit. - Aluminum Jake Seeley peg cores sold separately - Replacement sleeve sold individually
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the…
Replacement Sleeve for Odyssey's Graduate PC Peg. Sold individually.
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing. (2.9 oz)
Compatible cable for M2 Monolever.
Mike has wanted to do a signature grip with Odyssey for a long time. After trying out various grips over the years, he settled on the style you see above. Comfortable circular pattern with a medium feel and Mike Aitken’s approval!
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from…
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.
The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip…
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
Black Label's BMX Brake Pads are made of a grippy compound and are 60mm long for excellent speed control.
- Sold in pairs. - Allen wrench included.
Jagwire Disc Brake Hose Parts Protectors
This simple repair part is vital for getting bikes with side-pull caliper brakes safely back on the road. - 6mm size
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Giant's Derailleur Cable And Housing Set contains all the parts you need to get your bike's shifting back on track. The galvanized cable is double-ended for use with Campagnolo or Shimano/SRAM drivetrains. The full-length housing includes all necessary aluminum ferrules.
A range of sturdy, affordable cogs is an essential part of a single speeder's quiver. Origin-8's Single Speed Cog is available in 13, 14, 16 and 18T sizes is chrome plated to resist rust and increase longevity. It's designed for Shimano/SRAM style cassette bodies and is made with splined, hardened…
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX…