Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp…
- Aluminum and brass ferrules to finish cable housing - Cable end crimps for derailleur and brake cables - Cable Os for frame protection
- High roundness grade 300 balls in a shop dispenser bottle - 1/4"--250/bottle - 1/8"--500/bottle - 3/16"--500/bottle - 5/16"--250/bottle - 5/32"--500/bottle - 7/32"--500/bottle
Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Replacement reservoir cap screw for Hope brakes.
Jagwire's Cable Guide Stoppers are rubber adapters that fit over hydraulic brake lines so that the lines will fit into various open-type frame cable-housing stops and stay securely in place. You get a pack of 50.
- Aheadset preload adjusting bolt
• Alloy cable ends • 1.2mm to 1.6mm
• Allows riders to connect seat packs to the Bontrager Nebula Plus saddles with flex form technology • Plastic
M7 Shaft/M6 Head 48mm Long
- w/Nut - 1-3/4-inch
- 8x1mm Allen head
- Model: Replacement bolt - Compatibility: Allen, M5x16
- Aluminum w/lock nut - 18mm long/6mm O.D.
- Replacement cable anchor bolt for brakes - Includes nut and washer
- Hoods with (FD) are Flight-Deck compatible
- Aluminum w/lock nut and mount - Slotted mount design
• Designed to keep dust and dirt out of V-Brake cable/housing systems
- Crank dust cap - Works with most three-piece crank models
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
Inserts and removes Presta valve cores
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
Replacement dust cover for Origin 8 XLT Cranksets
For dust cap removal on Origin8 XLT integrated cranks
- Adjusts rear wheel for centering in frame - Size: 3/8" - Color: Silver
- For MTB levers - 7mm x 1mm - Aluminum construction
- Routes cables underneath the bottom bracket - Will not rust or corrode
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano,…