Accessories

- Goes on wet to penetrate rollers and side plates, then sets up to a soft, pliable wax - Chain is encased in a waterproof layer, shielded from dirt and grime - Special low melt point wax replenishes drivetrain by slow-Feeding clean lube from the inside layers outward, significantly reducing abrasive wear and eliminating corrosion - Smooth, quiet, trouble-free operation in all conditions for long lasting protection

Heavy-duty, non-flammable degreaser specifically designed to remove lube, dirt, mud, sand, and other contaminants from bike drivetrains. Unique and proprietary formulation thoroughly cleans all bike drivetrains without harming rubber o-rings or metal surfaces. Non-toxic, non-flammable, and eco-friendly formulation contains no VOCs, harmful acids, CFC’s, or solvents and is 50 state VOC compliant. Makes a great all-purpose wash when diluted 10:1 with water. For use as a bicycle drivetrain degreaser. Safe for incidental contact with other bicycle components. Can be used as an all-purpose bike wash when diluted 10:1 with water. Features - Specially designed for bike drivetrains. - Professional strength formulation. - Safe on o-rings and metal surfaces. - 100% biodegradable. - Contains no VOC's, harmful acids, CFC's or solvents. - Non-flammable.

Superior, all-purpose penetrating lube that displaces water and provides excellent rust and corrosion protection. Unique and proprietary formulation forms a durable film that provides protection against both wear and corrosion. MPPL is the perfect choice for anywhere that a penetrating or multi-purpose lubricant is needed, whether on equipment in the garage, or hinges and locks in the house. For use wherever rusted or corroded parts need freeing, or as a light lubricant. Features: - Prevents rust, corrosion, and wear. - Durable film keeps protecting long after initial application. - Will not harm rubber, plastic, or painted surfaces. - Suitable for use on O, X, and Z-rings. - Great for lubing pedals, shifters, and derailleurs. - Safe on most materials.

Fast-acting, all-purpose cleaner designed to remove mud, dirt, and debris from matte finishes. Specially blended surfactants and detergents lift away solids without sticking to the surface, leaving the surface clean and residue-free. Non-toxic, non-flammable, and eco-friendly formulation contains no VOCs, harmful acids, CFC’s or solvents and is 50 state VOC compliant. For use as a professional strength cleaner for matte finishes. Safe for use on all matte surfaces, from equipment to accessories. Features: - Cleans and protects matte finishes. - Adds no gloss or shine. - Removes dirt, dust, road grime, fingerprints, and more. - 100% biodegradable. - Contains no VOC's, harmful acids, CFC's or solvents. - Non-flammable.

- Constructed using a 6mm aluminum rod - Embossed MSW logo

MSW's PC-110 Water Bottle Cage secures your bottle while keeping weight to a minimum. The lightweight plastic is durable, and easily secures your bottle.

The MSW PC-150 composite water bottle cages are a great value, providing easy use and are less likely to scratch the finish on most water bottles. - Composite construction - Does not include mounting bolts - Embossed MSW logo

Keep an eye on what's behind you with MSW's Selfie Mirrors. With options to mount on a handlebar, on your helmet, or into your bar end with a folding design, you're free to choose the rear view that speaks to you.

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 extenders included for desired protection

- DoubleSpring Cap - FDA Approved - 100% BPA and Phthalate Free - Made in the USA - Perfect Fit with Giant and Liv Bottle Cages

Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g

Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! It is available in both left-side and right-side loading configurations.

The Kool-Stop Tire Bead Jack is an articulated tool, with a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing with difficult tires.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g

The Plus front bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your handlebars or forks, or use the integrated wearable clip to attach the light to your shirt pocket or panniers. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks or headband using the smart integrated clip. With an output of 40 lumens and a run time of up to 20 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.

The Plus rear bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your seatpost, seat stays, and pannier racks, or use the integrated wearable clip to attach the light to your t-shirt or backpack. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks, or headband using the smart integrated clip. With an output of 20 lumens and a run time of up to 40 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Garmin Edge 20, 25, 130, 510, 520, 530, 810, 820, 830 & various other cycling computers - Not compatible with Edge 1000 series

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Wahoo Elemnt, Elemnt Mini, Elemnt Bolt and Elemnt Roam - Also compatible with Pioneer computers

Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

• Small enough for any tool bag • Great for on trail repairs • HG chain compatible

- Foam padded cartridge provides insulation - Large volume makes filling big tires quick and easy

- Robust universal stand - User friendly - Alloy construction - Adjustable length via a twist knob